增强Ping工具:PingInfoView

超好用的Ping增强工具。PingInfoView很容易使用,运行后要求你输入网址或者IP地址,一行一个,然后程序会自动 Ping,显示出必要的信息。

PingInfoView 官方介绍:

Description:
PingInfoView is a small utility that allows you to easily ping multiple host names and IP addresses, and watch the result in one table. It automatically ping to all hosts every number of seconds that you specify, and displays the number of succeed and failed pings, as well as the average ping time. You can also save the ping result into text/html/xml file, or copy it to the clipboard.

Using PingInfoView:
PingInfoView doesn't require any installation process or additional dll files. In order to start using it, simply run the executable file (PingInfoView.exe), type the host names and IP addresses that you want to ping, and click the 'Ok' button to start pinging.

Known Issues:
Some people reported that PingInfoView stop pinging after a few hours of continuous work. I tested PingInfoView in multiple computers, and until now I couldn't find a way to reproduce the problem on my own computers. I also tried to locate memory or opened handles leaks that might cause this kind of problem, but until now I couldn't find any leak. This problem is a mystery, and I'm still looking for solution.

Use IP-Host Description format:
When this option is selected, you should specify the IP addresses list in the following format:
192.168.1.10 Main Server
192.168.1.11 Host 01
192.168.1.12 Host 02
The description of each IP address is automatically added to the description column.

Command-Line Options:

/stext Make a single ping test and save the result into a simple text file.
/stab Make a single ping test and save the result into a tab-delimited text file.
/scomma Make a single ping test and save the result into a comma-delimited text file (csv).
/stabular Make a single ping test and save the result into a tabular text file.
/shtml Make a single ping test and save the result into HTML file (Horizontal).
/sverhtml Make a single ping test and save the result into HTML file (Vertical).
/sxml Make a single ping test and save the result into XML file.
/loadfile Load the specified filename that contains host names and/or IP addresses. You can use this command-line option in conjunction with the above save commands (/scomm, /stab, and so on)
/PingTimeout Specifies the ping timeout value, in ms.
/PingEvery <0 | 1> Specifies whether to ping every xx seconds (0 - No, 1 - Yes)
/PingEverySeconds Specifies the number of seconds to wait between the pings.
/IPHostDescFormat <0 | 1> Specifies whether to use the IP-Host Description mode (0 - No, 1 - Yes)

System Requirements:
This utility works under Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, and Windows 7. Older versions of Windows are not supported.

http://www.nirsoft.net/utils/multiple_ping_tool.html

PingInfoView 应用实例:
http://bbs.app111.com/thread-275-1-1.html

PingInfoView 下载地址:
http://www.nirsoft.net/utils/pinginfoview.zip
http://down.tech.sina.com.cn/content/39266.html

Related Posts